Samsung Solar Remote Not Charging? Complete Guide for India (2026)

Updated May 2026 • 5-minute read • By the Faritha Team, Madurai

The Samsung SolarCell remote is one of the best innovations in smart TV remotes — no AA or AAA batteries ever needed. It charges using the light in your room or via USB-C. But when it stops working, most Indian users don't know why, or how to fix it.

At Faritha.com, we stock and ship original Samsung SolarCell remotes across India, and we get this question every week: "My Samsung solar remote is not charging — what do I do?" Here's everything you need to know.

How does the Samsung SolarCell remote charge?

The Samsung SolarCell remote has two charging methods — solar and USB-C. Understanding both is key to keeping it working.

How to charge Samsung SolarCell remote — step by step

Solar charging (daily habit):

1. When you put the remote down, place it face-down on a flat surface near a window or under a light
2. The solar panel on the back absorbs light automatically — no buttons to press
3. Leave it face-down whenever not in use — even 30 minutes of room light per day maintains the charge

USB-C charging (when battery is very low):

1. Connect a USB-C cable to the port at the bottom of the remote
2. Connect the other end to any USB power source — phone charger, TV USB port, or laptop
3. The red LED on the front will light up — charging has started
4. Wait until the LED turns off — remote is fully charged
5. Disconnect and use normally

Important: The USB-C cable is not included with the remote. Any standard USB-C cable works — the same cable you use for Android phones.

How to check Samsung SolarCell remote battery level

You can check the remaining battery directly on your TV:

1. Press the Home button on the remote
2. Go to Settings → All Settings → General & Privacy
3. Select Remote Control
4. The battery percentage will be displayed on screen

If the Remote Control menu does not appear, the remote may have lost its Bluetooth pairing. See the re-pairing section below.

Samsung SolarCell remote not charging — 6 fixes

Fix 1 — Clean the USB-C port

Dust and lint inside the USB-C port is the most common reason the remote won't charge via cable. Use a toothpick or dry toothbrush to gently clean the port. Do not use water or compressed air directly into the port.

Fix 2 — Try a different USB-C cable

Not all USB-C cables support charging. If the LED doesn't light up when you connect the cable, try a different cable — preferably the one you use to charge your phone. Cheap data-only cables sometimes don't carry charging current.

Fix 3 — Check your power source

Connect the USB-C cable to a wall adapter, not just a TV USB port. TV USB ports provide lower current (0.5A) which charges the remote very slowly. A phone wall adapter (1A or higher) charges faster and more reliably.

Fix 4 — Solar panel blocked or dirty

If the remote has been stored in a drawer or case, the solar panel may not have received any light for weeks. Wipe the back panel clean with a dry cloth and place it in a bright area — near a window in daylight — for 2–3 hours before testing again.

Fix 5 — Reset the remote

If the remote is unresponsive even after charging:

1. Press and hold the Return button + Enter button simultaneously for 10 seconds
2. The remote will reset and automatically re-pair with the TV
3. Test all buttons after reset

Fix 6 — Re-pair the remote with the TV

1. Point the remote at the TV from within 1 metre distance
2. Press and hold the Return button + Play/Pause button simultaneously for 3 seconds
3. A pairing pop-up will appear on screen
4. Select OK to complete pairing

Which Samsung SolarCell remote model do you have?

How to find your model number: Check the sticker on the back of your remote. If the remote is completely dead, check your TV's original box or the sticker on the back of the TV.

When to replace your Samsung SolarCell remote

Replace the remote if:

• The internal battery no longer holds charge even after USB-C charging
• The LED does not light up at all during USB-C charging despite trying multiple cables and power sources
• The remote was dropped in water
• Physical buttons are cracked or stuck
• Remote is over 4–5 years old and solar charging is no longer maintaining battery

The good news: original Samsung SolarCell replacement remotes are available at Faritha.com — tested, verified, and shipped fast across India. No need to visit a Samsung service centre or pay service charges.

Frequently asked questions

Can I charge Samsung solar remote with phone charger?

Yes — any USB-C cable connected to a phone wall adapter works perfectly. Use a 1A or higher adapter for faster charging. The cable that came with your Android phone will work.

How long does Samsung solar remote take to charge via USB-C?

Approximately 2–3 hours for a full charge from a 1A USB adapter. The red LED turns off when charging is complete.

Does Samsung solar remote work without charging if kept in light?

Yes — if you consistently place it face-down near a light source when not in use, solar charging alone is sufficient for most users. Samsung says a fully charged battery can last up to 2 years with regular solar exposure.

My Samsung solar remote is not working after charging — what to do?

Try the reset: press and hold Return + Enter for 10 seconds. Then re-pair with the TV using Return + Play/Pause for 3 seconds. If it still doesn't work, the internal battery may have failed and the remote needs replacement.

Where to buy original Samsung SolarCell remote in India?

Faritha.com stocks all Samsung SolarCell remote models — BN59-01385A, BN59-01391A, BN59-01432A, and BN59-01480A. Original, tested, delivered prepaid across India. Trusted by 1,42,000+ customers since 2018.