CA-188 Multifunction LED Inverter for Backlight, DC LED Controller Board Controller Board, 12 Connectors, LED Strip Tester with Cable Input Vol:6V-20V Output Power:1-50W

Technical assistance is not provided. You should know how to use it. If not, think twice before ordering. Thank you!

High Pressure LED Board Conversion Instructions 1: Connect the necessary power, ground and switch signals by the booster board to the universal LED amplifier board VCC ignition switch ADJ signal Brightness control GND ground Tip: Connect the same way as the LCD high voltage board 2: With a multimeter to measure the amount of LED light bar is the number of lines, which are some negatives which are the number of lines which are some lines The line is only in the most positive and negative points, engaging in technology should not be superior to seeing the original momentum table can see out of definition. 【Product Name】 Super universal interface 2P 6P 10P 12P complete universal interface LED High voltage plate backing plate The LED connection should pay attention to the definition of the interface is only positive and negative points, the positive input power supply must not inverted or wrong, Incorrect connection caused by the sequels themselves, special reminder, but also understanding. 【Size】 12.3 cm * 3.1 cm 【Annex】 send six LED cables + 1 6P 10P 12P power supply control line 6P soft row electronic lines 【Interface definition】 outputs 12 interfaces -3 + 4-3 -4 + 2-4 + 3-9 -1 + 1 -2 + 2-2 electronic cable -2 + 2-2FFC -4 + 2-4 -3 + 4-3 -5 + 2-5 * 2 SMALL MOUTH * 2 Input: Power supply switch signal brightness control ground wire (Same as LCD) Not all interfaces are soldered, we pre-installed one or more details to see the description above. Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Graphite Crucible Mini Gold Furnace Metal Melting Torch: 1 x LED Backlight Inverter Tester DC Controller Board Contro