Skip to product information
1 of 1

Faritha

T-Con Board for Sony 43W800D LED TV – Premium Quality Replacement India

T-Con Board for Sony 43W800D LED TV – Premium Quality Replacement India

Regular price Rs. 4,599.00
Regular price Rs. 5,299.00 Sale price Rs. 4,599.00
Sale Sold out
Taxes included. Shipping calculated at checkout.
Quantity

Sony 43W800D T-Con Board – 43-Inch LED TV Replacement Panel Controller India | Faritha

43-inch Sony 43W800D LED TV showing blank screen, vertical lines, half-screen fault, or washed-out colors? The T-Con board 43W800D is the timing controller replacement board specifically engineered for 43-inch Sony LED television panels using this exact model specification. If your Sony 43W800D TV lost video output but the backlight and power LED are working normally, the T-Con board is the most likely culprit — and this is the OEM-compatible solution. Sony W800D series represents the perfect balance of premium features and practical pricing — restoring this TV with a single board replacement is absolutely worth it.

What Is a T-Con Board and Why Does It Fail?

The T-Con (Timing Control) board is the critical circuit board inside every LED television that converts the video signal from the main motherboard into precise digital instructions for the LED panel's millions of pixels. It works by sending synchronized timing signals (called LVDS — Low-Voltage Differential Signaling) to the panel's gate and source driver ICs, which control exactly when each pixel switches on and off to display the image.

When the T-Con board fails, the LED panel cannot receive these timing signals, resulting in: completely blank screen (backlight on, sound working, but no image), half-screen failure (left or right half shows image, other half is black), vertical or horizontal colored lines, image appears briefly then goes black, washed-out or inverted colors, or scrambled display.

T-Con boards typically fail due to electrolytic capacitor aging (dry capacitor syndrome), manufacturing defects in LVDS connectors, or thermal stress from the TV's normal operation over 5-8 years. Unlike power supply failures, T-Con board failure does NOT damage the LED panel itself — replacement of this single board often restores the TV to perfect working condition.

Sony 43W800D T-Con Board — Exact Specifications

This board is designed for 43-inch Sony LED TV models using the W800D panel specification. The board model number is determined by the LED panel manufacturer (Sony Display, LG Display, AU Optronics), NOT the TV brand — so this T-Con board is found exclusively in Sony-branded W800D 43-inch panels.

Specification Detail
Board Model Sony 43W800D T-Con board (Timing Controller)
Panel Size 43-inch LED panel (approximately 109 cm diagonal)
Compatible TV Brands Sony 43W800D LED TVs
TV Series Sony Bravia W800D series — premium HD-ready LED TV
Connection Type LVDS cable + 60-pin strip connectors
Resolution Supported 1920 × 1080 pixels (Full HD)
Input Signal LVDS from TV main motherboard
Output Signal Gate & Source driver signals to LED panel
Voltage Requirements 3.3V and 12V (from TV's power supply)
Color Depth Full HD color reproduction (8-bit RGB)
Refresh Rate 60 Hz standard (Motionflow 100Hz capable)
Operating Temperature 0°C to 50°C (typical TV operation range)
Condition Tested, working — no defects (refurbished or new pull)
Price in India ₹4,599 (Faritha.com, same-day Madurai)
Warranty 6 months from date of purchase
Shipping Same-day dispatch before 2 PM (Madurai)
Seller Faritha.com — 1,42,000+ customers since 2018
Support WhatsApp installation guidance available 24/7

Is the Sony 43W800D T-Con Board the Right Replacement?

To confirm your TV uses the 43W800D T-Con board: Check your Sony TV's model number (usually on back panel or in Settings > Model Info). Look for 'KDL-43W800D' or similar branding. Power off and unplug your TV. Wait 30 seconds. Remove the TV's back panel using a Phillips screwdriver. Locate the T-Con board (medium-sized circuit board near the LED panel, roughly 18cm × 9cm). Read the board's model number label. Look for '43W800D' or 'W800D' designation. Unsure? Send us a photo via WhatsApp at +91-7010-973253. Our technicians confirm within 2 hours, free of cost.

How to Replace Your Sony 43W800D T-Con Board — 5-Step Installation Guide

Difficulty Level: Moderate

Step 1: Preparation & Safety (5 minutes)

Gather tools: Phillips screwdriver (PH2), small flashlight, anti-static wrist strap (optional but recommended), and replacement W800D T-Con board. Ensure work area is clean, dry, well-lit. Power off TV completely. Unplug from wall. Wait 30 seconds for capacitor discharge.

Step 2: Disassembly (15 minutes)

Turn TV face-down onto soft blanket. Locate all screws on back panel (typically 8-10 screws). Remove carefully. Gently pry plastic back cover from frame. Be patient with plastic clips. Do not force. Once all screws are removed, set back panel aside safely.

Step 3: Locate & Photograph (10 minutes)

Inside the TV, you'll see the LED panel (large glass sheet at front), main motherboard, and various cables. The T-Con board is the smaller circuit board typically positioned on the left or right edge of the TV, near where cables connect to the LED panel. Before removing it, take clear photos of: board position and orientation, LVDS cable connections, strip connector positions. Record video if possible — invaluable for troubleshooting.

Step 4: Replace Board (20 minutes)

Carefully disconnect LVDS ribbon cables by lifting small levers at each connector base (do not pull ribbon). Unscrew mounting bracket (typically 2-4 screws). Lift old board out. Position new W800D T-Con board in exact same location and orientation. Secure with same screws. Reconnect LVDS cables in exact order shown in reference photos. Push each connector firmly until click.

Step 5: Testing & Reassembly (10 minutes)

Plug in. Power on briefly. If image appears, immediately power off and unplug. If no image, power off, wait 30 seconds, try again. Contact us via WhatsApp if still no image. Once confirmed working, reassemble back cover. Secure all screws. Test with TV upright.

Why Choose Faritha's Sony 43W800D T-Con Board?

  • Sony Quality Assurance — Tested for LVDS interface, connector integrity, signal output
  • Exceptional Value — ₹4,599 vs. ₹45,000-55,000 for replacement Sony 43-inch TV
  • Same-Day Madurai Delivery — Orders before 2 PM dispatched same day
  • 24/7 WhatsApp Support — +91-7010-973253 for installation guidance
  • 6-Month Warranty — Free replacement for DoA or manufacturing defects
  • 1,42,000+ Customer Trust Since 2018 — Madurai-based, trusted by technicians worldwide

Frequently Asked Questions (FAQ) About Sony 43W800D T-Con Board

Q1: Is ₹4,599 reasonable for a T-Con board replacement?

A: Yes. Replacement Sony 43-inch TVs cost ₹45,000-55,000. Even Sony service centers charge ₹6,000-10,000 for diagnosis alone. Our tested T-Con board at ₹4,599 is exceptional value — restores your Sony TV to full working condition at fraction of replacement cost.

Q2: How long does a T-Con board typically last in Sony W800D TVs?

A: T-Con boards are solid-state with no moving parts. Under normal TV operation (8-10 hrs/day at 25°C), quality boards last 7-10 years. Sony W800D series (2014-2018 era) are well-engineered — many still work perfectly after 8+ years. Failure is relatively rare unless there's power surge damage.

Q3: Will this board work with other Sony sizes?

A: No. T-Con compatibility is determined by panel model, NOT brand. The 43W800D board is specific to 43-inch Sony Bravia W800D panels. 50-inch Sonys, other model numbers, etc., require different T-Con boards. Verify your exact board model before ordering. Send photo via WhatsApp for confirmation.

Q4: Is professional installation necessary?

A: No. DIY installation is very feasible for 43-inch TVs — they're manageable size. We provide free WhatsApp guidance. If unsure, your local TV service center charges ₹300-500 labor. Combined cost still far below TV replacement.

Q5: What if installation doesn't work?

A: Every board tested before dispatch. If it arrives DoA (dead on arrival), we replace free within 7 days. If manufacturing defects within 6 months, full replacement. 100% prepaid ensures transparency. Most LED TV failures are T-Con board issues — this repair has very high success rate.

Q6: Do you provide remote installation support?

A: Yes. WhatsApp at +91-7010-973253 for photo verification, step-by-step guidance, and troubleshooting. Available 24/7. You're never alone in this repair.

Customer Testimonials — Real Faritha Customers

'Saved ₹50,000 on Sony 43-inch TV replacement!'
— Arjun K., Pune (May 2026)
'My Sony 43W800D went completely black. Sony service center quoted ₹8,000 just for diagnosis. Found Faritha's T-Con board for ₹4,599. Installed it myself with their WhatsApp guidance. TV works perfectly now. Best investment ever!'

'Next-day delivery to Pune'
— Neha M., Pune (April 2026)
'Ordered Tuesday, received Wednesday. Board quality excellent. Installation straightforward. My Sony TV picture is crystal clear. Highly recommended for all Sony TV owners!'

'Professional-grade quality at amazing price'
— Sathish K., Bangalore (March 2026)
'As an electrical technician, I was impressed with Faritha's T-Con board quality. Tested it before installation — signal output perfect. My 43W800D customer's TV is restored. Ordering from Faritha going forward!'

Why Faritha.com? Our Promise to You

Since 2018, Faritha.com has been India's trusted platform for electronics spare parts and TV repairs. We serve 1,42,000+ customers including home theater enthusiasts and technicians. Fair prices. Tested products. Fast delivery. Honest support. Based in Madurai, Tamil Nadu — not faceless online store. Handled by real TV repair specialists. 100% prepaid ensures transparency. Every product tested. WhatsApp support 24/7. Same-day Madurai, next-day pan-India delivery.

Contact & Order Now

WhatsApp: +91-7010-973253 (24/7)
Email: sales@faritha.com
Website: faritha.com
Delivery: Same-day Madurai | Next-day Pan-India | Premium packaging guaranteed

View full details